PeelClear Paint Protection
The sprayed-on paint protection that peels off clean
PMW Auto Body is an officially certified PeelClear shop. PeelClear is a waterborne, multi-polymer coating that is applied in the booth like factory paint, forms an invisible protective film, and peels off without residue when you want a fresh surface.
What is PeelClear?
A new category of paint protection
PeelClear is not a film. It is a crystal-clear, peelable coating that is sprayed onto your vehicle with HVLP equipment, exactly like automotive paint. Once cured, it becomes a permanent-feeling, high-impact protective layer that bonds to the clear coat without adhesives.
Because it is sprayed, PeelClear covers every curve, every body line, and every emblem with zero visible edges or seams. And because the bond is mechanical, it lifts off cleanly whenever you want to remove or refresh it, with no damage to the factory paint underneath.
At a glance
- Waterborne, multi-polymer formulation
- Spray-applied in a controlled booth
- No adhesive — peels off residue-free
- Engineered to resist yellowing far better than standard PPF
- 100% waterborne, low-VOC, biodegradable
- Reversible color changes available
Why PeelClear
Benefits of a sprayed, peelable coating
Invisible, seamless finish
Sprayed on to follow every curve, edge, and emblem. No visible film edges, no seams, no stretching marks.
Peels off clean
Mechanical bond, not adhesive. When you are ready to remove or refresh, it lifts off without residue or clear-coat damage.
Rock-chip protection
Durable, impact-resistant barrier against gravel, road debris, and minor scratches from daily driving.
Resists yellowing
Engineered to outperform traditional PPF on UV yellowing so the finish stays optically clear for the long haul.
Eco-friendly formula
100% waterborne, low-VOC, biodegradable, and recyclable. Safer for your vehicle, your family, and the environment.
Reversible color changes
Use PeelClear for a full color change, then peel it back to your factory paint whenever you want.
PeelClear vs PPF
How PeelClear compares to traditional paint protection film
| Feature | PeelClear | Traditional PPF |
|---|---|---|
| Application method | Sprayed (HVLP), seamless | Pre-cut adhesive film |
| Edges & seams | Invisible, follows every contour | Visible seams on curved panels |
| Removal | Peels off clean, no residue | Adhesive residue, chemical removers |
| Yellowing resistance | Up to 7x better than standard PPF | Varies, prone to UV yellowing |
| Coverage | Full panels, trim, emblems, complex curves | Limited by film dimensions |
| Environmental profile | Waterborne, low-VOC, biodegradable | Petroleum-based film and adhesives |
Our Process
How we apply PeelClear
Consultation
We evaluate your vehicle, discuss coverage (full car, high-impact zones, or color change), and provide a written quote.
Surface prep
Full wash, decontamination, and paint correction where needed so PeelClear bonds to a flawless surface.
Booth application
Applied in a controlled paint booth with HVLP equipment, exactly like a factory refinish, by certified technicians.
Cure & inspection
Controlled cure, multi-point quality check, and walk-through before the vehicle leaves.
Who It's For
Ideal use cases
Daily drivers
Highway commuters who want real rock-chip and debris protection without the visible edges of film.
Exotics & performance cars
Porsche, BMW M, AMG, Lamborghini and similar vehicles where a flawless, seam-free finish matters.
Leased vehicles
Protect panels during your lease, then peel it back before turn-in to reveal untouched factory paint.
Track & spirited drivers
Added protection for cars that see track days, canyon drives, and high-speed road trips.
Reversible color changes
Run a custom color or finish now — peel back to factory when you want to sell or refresh.
Classic & collector cars
Preserve original paint under a fully removable protective layer with no adhesive residue.
Certified Shop
Why a certified installer matters
PeelClear is a sprayed product. The quality of the result depends on surface prep, booth conditions, HVLP technique, and cure protocols — the same fundamentals that separate a great paint job from an average one. PMW Auto Body has completed official PeelClear training, and we apply the product in the same PPG-certified booth where we refinish collision work.
- Officially certified on the full PeelClear application process
- I-CAR Gold Class and PPG Certified refinish facility
- Climate-controlled paint booth and HVLP application
- Every car gets proper prep, correction, and a documented QC pass
- Serving Mamaroneck, Larchmont, Rye, New Rochelle, White Plains, and all of Westchester County
Certified
Frequently asked questions
What is PeelClear?
PeelClear is a waterborne, multi-polymer peelable paint protection coating that is sprayed onto your vehicle like traditional automotive paint. Once cured, it forms a crystal-clear, adhesive-free protective film that shields the factory paint from rock chips, road debris, UV, and minor scratches, and can be peeled off cleanly when you want a fresh surface or a color change.
How is PeelClear different from Paint Protection Film (PPF)?
PPF is a pre-cut adhesive film applied to each panel. PeelClear is sprayed on, so it conforms to every curve, edge, emblem, and trim piece with no seams, no stretching, and no visible edges. PeelClear is also engineered to resist yellowing far better than traditional PPF, and because it uses a mechanical bond instead of adhesive, it removes cleanly with no residue.
Will PeelClear damage my factory paint?
No. PeelClear is specifically designed to bond mechanically to the clear coat without adhesives. When removed, it lifts off cleanly and leaves the original factory finish untouched underneath.
How long does PeelClear last?
Durability depends on how the vehicle is driven and stored, but PeelClear is backed by a long-term no-yellowing warranty and is engineered to hold up to daily driving, UV exposure, and typical road chemicals for years.
Can PeelClear be applied in any color or finish?
Yes. The most common application is clear over factory paint, but PeelClear can also be used as a full color change that peels back to your factory finish later. Ask us about matte, satin, and custom color options.
Why should I choose a PeelClear certified shop?
PeelClear is a sprayed product that requires proper surface prep, booth conditions, HVLP technique, and curing protocols. Certified shops are trained directly on the PeelClear process so the coating bonds correctly, looks factory-invisible, and peels cleanly when removed. PMW Auto Body is an officially certified PeelClear installer.
Is PeelClear safe for the environment?
Yes. PeelClear is 100% waterborne, low-VOC, biodegradable, and recyclable, making it one of the most environmentally responsible paint protection options on the market.
Do you do PeelClear on exotics and performance cars?
Yes. PeelClear is an excellent fit for exotics, track cars, and performance builds where owners want rock-chip protection without the visible edges or yellowing associated with older PPF. We regularly work on Porsche, BMW M, AMG, Lamborghini, and more.
Protect the paint. Keep it reversible.
Talk to a certified PeelClear technician at PMW Auto Body. We will walk you through coverage options, pricing, and scheduling for your vehicle.